Thursday, March 15, 2018

For Powder Coating Manitoba Is Worth Visiting

By Laura Mitchell


Powder coating is a method used to apply finish on metal of any type. The finish may serve protective or decorative purposes. When compared to liquid paints, this method is relatively new. However, it is gaining popularity at a very rate that it is overtaking liquid paints in number of applications. It is used in residential, commercial, as well as industrial settings. The advantages associated with this method are discussed in this article. When one needs powder coating Manitoba offers the perfect location to visit.

For a start, the powder utilized in this work is prepared in a special way using particles of pigment and resin. To improve the quality of the coat the particles are normally grounded into fine particles. One can get any color they want as the mixture can be made in virtually any color. Computer can be used in generating modern colors. The computer generated colors can then be mimicked by mixing the resin and pigment.

Electrostatic charges are used for the application. The powder is usually electrostatically charged while the surface or substrate is grounded. This way, the substrate is able to attract particles in the powders to its surface. The charge retains the particles in place until curing has been completed. After curing has been completed, the finish that results is durable, high-quality, and smooth in nature.

Heat is required during curing and that is why the oven must have a heating element. To effectively cure the surface certain optimum temperatures must be attained. Failure to achieve the optimal temperatures means that the coat may be ruined meaning that the entire process has to be repeated. The curing duration differs according to the size of the substrate is question. Once curing is finished the substrate has to be given time to cool.

This technique has one advantage when it comes to durability as the final coats are scratch, chipping and wear resistant. Besides this, the unlimited color selection is another advantage. The color choice includes iridescent, high gloss, candies, clear, wrinkle, hammer tone, satin, flat, metallic, glitter, and fluorescent among others. Rough, smooth and wrinkled among others are the examples of textures in which this method is available.

When a surface to be coated has imperfections then rough textures are used to conceal them. When the coats are properly applied they retain their beauty for a long time. In the event of damages in parts of the coating, it is easier to correct the mistake without redoing the whole surface. This finishing technique produces durable results that no other finishing method can achieve. Also its quality cannot be compared to that of any other method.

The method is also cheaper in comparison to other methods of finishing. Powders used in the process cost lower than liquid paints. Also, experts are usually in a position to buy the exact amount needed for the work they are doing to avoid wastage. Big surfaces can be painted by a single individual within a very short time, which save time and money.

The final advantage is that it is environment friendly. Being environment friendly means that it does not contain chemicals or solvents which can result in environmental degradation. The resin and pigment used are not harmful to the environment. As a result disposing unused powder is much easy.




About the Author:



No comments:

Post a Comment